Banks tighten the screws on small-deposit mortgages

Banks tighten the screws on small-deposit mortgages

New research from RateCity shows banks have put the brakes on lending to people with small deposits, slashing the number of mortgage products with a maximum loan-to-value ratio (LVR) of 95 per cent in the past three years.

Fewer than a third (32 per cent) of home loans in the RateCity database now offer lending up to a maximum of 95 per cent of the value of the property.

That’s down from 76 per cent of all loans on offer in early 2015, in line with lending guidelines by the Australian Prudential Regulation Authority, who want loans with small deposits to be the exception, rather than the rule.

Sally Tindall, spokesperson at RateCity, said the banks were actively looking for deposits of 20 per cent, if not more.

“For Australians battling to crack into the highly competitive home loan market, low-deposit loans have been a doorway in. But the rules have changed and now borrowers that might have been given the green light three years ago are starting to be turned away,” she said.

RateCity research shows that upgrading from a 5 per cent deposit to a 20 per cent deposit on a $500,000 mortgage will require a buyer to stump up an extra $75,000 in cash.

“These new LVR requirements will set a lot of potential buyers back, because they just don’t have access to that kind of money,” Ms Tindall said.

“But the alternative is worse. Stretching yourself thin at record-low interest rates can be a recipe for disaster.

“It’s been over seven years since we’ve experienced an RBA rate hike and people have become complacent. These new LVR rules will sharpen the focus of those who are serious about securing housing finance.”

Did you find this helpful? Why not share this news?

Advertisement

RateCity

Money Health Newsletter

Subscribe for news, tips and expert opinions to help you make smarter financial decisions

By submitting this form, you agree to the RateCity Privacy Policy, Terms of Use and Disclaimer.

Advertisement

Learn more about home loans

What are the pros and cons of no-deposit home loans?

It’s no longer possible to get a no-deposit home loan in Australia. In some circumstances, you might be able to take out a mortgage with a 5 per cent deposit – but before you do so, it’s important to weigh up the pros and cons.

The big advantage of borrowing 95 per cent (also known as a 95 per cent home loan) is that you get to buy your property sooner. That may be particularly important if you plan to purchase in a rising market, where prices are increasing faster than you can accumulate savings.

But 95 per cent home loans also have disadvantages. First, the 95 per cent home loan market is relatively small, so you’ll have fewer options to choose from. Second, you’ll probably have to pay LMI (lender’s mortgage insurance). Third, you’ll probably be charged a higher interest rate. Fourth, the more you borrow, the more you’ll ultimately have to pay in interest. Fifth, if your property declines in value, your mortgage might end up being worth more than your home.

Remaining loan term

The length of time it will take to pay off your current home loan, based on the currently-entered mortgage balance, monthly repayment and interest rate.

How is interest charged on a reverse mortgage from IMB Bank?

An IMB Bank reverse mortgage allows you to borrow against your home equity. You can draw down the loan amount as a lump sum, regular income stream, line of credit or a combination. The interest can either be fixed or variable. To understand the current rates, you can check the lender’s website.

No repayments are required as long as you live in the home. If you sell it or move to a senior living facility, the loan must be repaid in full. In some cases, this can also happen after you have died. Generally, the interest rates for reverse mortgages are higher than regular mortgage loans.

The interest is added to the loan amount and it is compounded. It means you’ll pay interest on the interest you accrue. Therefore, the longer you have the loan, the higher is the interest and the amount you’ll have to repay.

How to use the ME Bank reverse mortgage calculator?

You can access the equity in your home to help you fund your needs during your senior years. A ME Bank reverse mortgage allows you to tap into the equity you’ve built up in your home while you continue living in your house. You can also use the funds to pay for your move to a retirement home and repay the loan when you sell the property.

Generally, if you’re 60 years old, you can borrow up to 15 per cent of the property value. If you are older than 75 years, the amount you can access increases to up to 30 per cent. You can use a reverse mortgage calculator to know how much you can borrow.

To take out a ME Bank reverse mortgage, you’ll need to provide information like your age, type of property – house or an apartment, postcode, and the estimated market value of the property. The loan to value ratio (LVR) is calculated based on your age and the property’s value.

Cash or mortgage – which is more suitable to buy an investment property?

Deciding whether to buy an investment property with cash or a mortgage is a matter or personal choice and will often depend on your financial situation. Using cash may seem logical if you have the money in reserve and it can allow you to later use the equity in your home. However, there may be other factors to think about, such as whether there are other debts to pay down and whether it will tie up all of your spare cash. Again, it’s a personal choice and may be worth seeking personal advice.

A mortgage is a popular option for people who don’t have enough cash in the bank to pay for an investment property. Sometimes when you take out a mortgage you can offset your loan interest against the rental income you may earn. The rental income can also help to pay down the loan.

What do people do with a Macquarie Bank reverse?

There are a number of ways people use a Macquarie Bank reverse mortgage. Below are some reasons borrowers tend to release their home’s equity via a reverse mortgage:

  • To top up superannuation or pension income to pay for monthly bills;
  • To consolidate and repay high-interest debt like credit cards or personal loans;
  • To fund renovations, repairs or upgrades to their home
  • To help your children or grandkids through financial difficulties. 

While there are no limitations on how you can use a Macquarie reverse mortgage loan, a reverse mortgage is not right for all borrowers. Reverse mortgages compound the interest, which means you end up paying interest on your interest. They can also affect your entitlement to things like the pension It’s important to think carefully, read up and speak with your family before you apply for a reverse mortgage.

How much deposit do I need for a home loan from ANZ?

Like other mortgage lenders, ANZ often prefers a home loan deposit of 20 per cent or more of the property value when you’re applying for a home loan. It may be possible to get a home loan with a smaller deposit of 10 per cent or even 5 per cent, but there are a few reasons to consider saving a larger deposit if possible:

  • A larger deposit tells a lender that you’re a great saver, which could help increase the chances of your home loan application getting approved.
  • The more money you pay as a deposit, the less you’ll have to borrow in your home loan. This could mean paying off your loan sooner, and being charged less total interest.
  • If your deposit is less than 20 per cent of the property value, you might incur additional costs, such as Lenders Mortgage Insurance (LMI).

When does Commonwealth Bank charge an early exit fee?

When you take out a fixed interest home loan with the Commonwealth Bank, you’re able to lock the interest for a particular period. If the rates change during this period, your repayments remain unchanged. If you break the loan during the fixed interest period, you’ll have to pay the Commonwealth Bank home loan early exit fee and an administrative fee.

The Early Repayment Adjustment (ERA) and Administrative fees are applicable in the following instances:

  • If you switch your loan from fixed interest to variable rate
  • When you apply for a top-up home loan
  • If you repay over and above the annual threshold limit, which is $10,000 per year during the fixed interest period
  • When you prepay the entire outstanding loan balance before the end of the fixed interest duration.

The fee calculation depends on the interest rates, the amount you’ve repaid and the loan size. You can contact the lender to understand more about what you may have to pay. 

Does Australia have no-deposit home loans?

Australia no longer has no-deposit home loans – or 100 per cent home loans as they’re also known – because they’re regarded as too risky.

However, some lenders allow some borrowers to take out mortgages with a 5 per cent deposit.

Another option is to source a deposit from elsewhere – either by using a parental guarantee or by drawing out equity from another property.

What is a loan-to-value ratio (LVR)?

A loan-to-value ratio (otherwise known as a Loan to Valuation Ratio or LVR), is a calculation lenders make to work out the value of your loan versus the value of your property, expressed as a percentage.   Lenders use this calculation to help assess your suitability for a home loan, and whether you need to pay lender’s mortgage insurance (LMI). As a general rule, most banks will require you to pay LMI if your loan-to-value ratio is 80 per cent or more.   LVR is worked out by dividing the loan amount by the value of the property. If you are looking for a quick ball-park estimate of LVR, the size of your deposit is a good indicator as it is directly proportionate to your LVR. For instance, a loan with an LVR of 80 per cent requires a deposit of 20 per cent, while a 90 per cent LVR requires 10 per cent down payment. 

LOAN AMOUNT / PROPERTY VALUE = LVR%

While this all sounds simple enough, it is worth doing a more accurate calculation of LVR before you commit to buying a place as there are some traps to be aware of. Firstly, the ‘loan amount’ is the price you paid for the property plus additional costs such as stamp duty and legal fees, minus your deposit amount. Secondly, the ‘property value’ is determined by your lender’s valuation of the property, not the price you paid for it, and sometimes these can differ so where possible, try and get your bank to evaluate the property before you put in an offer.

How much deposit do I need for a home loan from NAB?

The right deposit size to get a home loan with an Australian lender will depend on the lender’s eligibility criteria and the value of your property.

Generally, lenders look favourably on applicants who save up a 20 per cent deposit for their property This also means applicants do not have to pay Lenders Mortgage Insurance (LMI). However, you may still be able to obtain a mortgage with a 10 - 15 per cent deposit.  

Keep in mind that NAB is one of the participating lenders for the First Home Loan Deposit Scheme, which allows eligible borrowers to buy a property with as low as a 5 per cent deposit without paying the LMI. The Federal Government guarantees up to 15 per cent of the deposit to help first-timers to become homeowners.

How much deposit will I need to buy a house?

A deposit of 20 per cent or more is ideal as it’s typically the amount a lender sees as ‘safe’. Being a safe borrower is a good position to be in as you’ll have a range of lenders to pick from, with some likely to offer up a lower interest rate as a reward. Additionally, a deposit of over 20 per cent usually eliminates the need for lender’s mortgage insurance (LMI) which can add thousands to the cost of buying your home.

While you can get a loan with as little as 5 per cent deposit, it’s definitely not the most advisable way to enter the home loan market. Banks view people with low deposits as ‘high risk’ and often charge higher interest rates as a precaution. The smaller your deposit, the more you’ll also have to pay in LMI as it works on a sliding scale dependent on your deposit size.

What is a low-deposit home loan?

A low-deposit home loan is a mortgage where you need to borrow more than 80 per cent of the purchase price – in other words, your deposit is less than 20 per cent of the purchase price.

For example, if you want to buy a $500,000 property, you’ll need a low-deposit home loan if your deposit is less than $100,000 and therefore you need to borrow more than $400,000.

As a general rule, you’ll need to pay LMI (lender’s mortgage insurance) if you take out a low-deposit home loan. You can use this LMI calculator to estimate your LMI payment.

How can I avoid mortgage insurance?

Lenders mortgage insurance (LMI) can be avoided by having a substantial deposit saved up before you apply for a loan, usually around 20 per cent or more (or a LVR of 80 per cent or less). This amount needs to be considered genuine savings by your lender so it has to have been in your account for three months rather than a lump sum that has just been deposited.

Some lenders may even require a six months saving history so the best way to ensure you don’t end up paying LMI is to plan ahead for your home loan and save regularly.

Tip: You can use RateCity mortgage repayment calculator to calculate your LMI based on your borrowing profile