Hobart holds best bet on affordable home loans

Hobart holds best bet on affordable home loans

Aussies looking to get a foot on the property ladder outside of bigger cities like Sydney and Melbourne have been turning to Hobart as an affordable alternative in recent years.

According to research from CoreLogic, Hobart still holds its title of “most affordable capital city”, with a median dwelling value of $435,833, although recently Hobart’s substantial dwelling value growth has been impacting its reputation.

Cameron Kusher, Senior Research Analyst for CoreLogic, noted that affordability was a “big driver” of growing demand for housing in Hobart over recent years.

In the three years to July 2018, Hobart dwelling values have grown by 32.4 per cent. The sudden increase in demand for housing in Hobart, paired with little actually being built, has contributed to these figures. However, in a sign the market may be weakening, July 2018 quarterly data showed that values increased only by 1.1 per cent – the “slowest rate of quarterly growth since July 2016”.

Quarterly and annual changes in dwelling values, Hobart

istock_79305201_small5

Source: CoreLogic

A sign of weakness in the Hobart market was also demonstrated in its annual rate of growth. Although the capital city’s dwelling values grew 11.5 per cent higher over the past 12 months (making Hobart the region with the highest value growth in Australia), this rate was the slowest Hobart had seen since February 2017.

Value premium for other capital cities relative to Hobart

While Sydney and Melbourne are still more expensive than Hobart, the value gap between all other capital cities and Hobart has been narrowing in recent years.

Capital city

Median value gap compared to Hobart

Time since value gap was as narrow

Adelaide

1% Higher

2009

Darwin

1% Higher

Mid-2005

Perth

5% Higher

Mid-2004

Brisbane

13% Higher

1988

Canberra

35% Higher

1998

Change in dwelling values from peak by deciles, to July 2018

istock_79305201_small5

Source: CoreLogic

“Looking at CoreLogic’s Hedonic Index across valuation deciles, it becomes even clearer that some weakness is beginning to emerge in the Hobart market,” explained Mr Kusher.

“The above chart breaks Hobart properties into 10 even segments based on their value with the 1st decile reflecting the most affordable ten percent of properties and 10th decile representing the most expensive properties ten percent of properties. 

“Any weakness in the Hobart market is apparent across the more expensive properties with the top 10% of properties having already recorded a fall of -1.5 per cent from their peak. 

“At this stage values continue to rise across the most affordable properties in the city,” said Mr Kusher.

What can we expect for the Hobart Housing Market?

A housing slowdown is “imminent” according to Mr Kusher, who stated that the “deterioration in housing affordability in Hobart over recent years has led to the loss of its value advantage relative to other capital cities”.

“At this stage values are increasing, albeit at a slower pace and stock for sale remains low which means, at least for now, a severe slowing of conditions such as those seen in Sydney and Melbourne is unlikely to occur. 

“Nevertheless, stock for sale is rising, as is the new supply of housing is rising and signs of market weakness are appearing across the higher value areas of the city. 

“Given this we would expect that growth in dwelling values in Hobart is set to be much slower over the coming years than it has been over the past three or so years,” said Mr Kusher.

Did you find this helpful? Why not share this news?

Advertisement

RateCity

Money Health Newsletter

Subscribe for news, tips and expert opinions to help you make smarter financial decisions

By signing up, you agree to the ratecity.com.au Privacy & Cookies Policy and Terms of Use, Disclaimer & Privacy Policy

Advertisement

Learn more about home loans

How can I get ANZ home loan pre-approval?

Shopping for a new home is an exciting experience and getting a pre-approval on the loan may give you the peace of mind that you are looking at properties within your budget. 

At the time of applying for the ANZ Bank home loan pre-approval, you will be required to provide proof of employment and income, along with records of your savings and debts.

An ANZ home loan pre-approval time frame is usually up to three months. However, being pre-approved doesn’t necessarily mean you will get your home loan. Other factors could lead to your home loan application being rejected, even with a prior pre-approval. Some factors include the property evaluation not meeting the bank’s criteria or a change in your financial circumstances.

You can make an application for ANZ home loan pre-approval online or call on 1800100641 Mon-Fri 8.00 am to 8.00 pm (AEST).

Why should I get an ING home loan pre-approval?

When you apply for an ING home loan pre-approval, you might be required to provide proof of employment and income, savings, as well as details on any on-going debts. The lender could also make a credit enquiry against your name. If you’re pre-approved, you will know how much money ING is willing to lend you. 

Please note, however, that a pre-approval is nothing more than an idea of your ability to borrow funds and is not the final approval. You should receive the home loan approval  only after finalising the property and submitting a formal loan application to the lender, ING. Additionally, a pre-approval does not stay valid indefinitely, since your financial circumstances and the home loan market could change overnight.

 

 

How long does Bankwest take to approve home loans?

Full approval for a home loan usually involves a property valuation, which, Bankwest suggests, can take “a week or two”. As a result, getting your home loan approved may take longer. However, you may get full approval within this time if you applied for and received conditional approval, sometimes called a pre-approval, from Bankwest before finalising the home you want to buy.  

Another way of speeding up approvals can be by completing, signing, and submitting your home loan application digitally. Essentially, you give the bank or your mortgage broker a copy of your home’s sale contract and then complete the rest of the steps online. Bankwest has claimed this cuts the approval time to less than four days, although this may only happen if your income and credit history can be verified easily, or if your home’s valuation doesn’t take time.

Can I apply for an ANZ non-resident home loan? 

You may be eligible to apply for an ANZ non-resident home loan only if you meet the following two conditions:

  1. You hold a Temporary Skill Shortage (TSS) visa or its predecessor, the Temporary Skilled Work (subclass 457) visa.
  2. Your job is included in the Australian government’s Medium and Long Term Strategic Skills List. 

However, non-resident home loan applications may need Foreign Investment Review Board (FIRB) approval in addition to meeting ANZ’s Mortgage Credit Requirements. Also, they may not be eligible for loans that require paying for Lender’s Mortgage Insurance (LMI). As a result, you may not be able to borrow more than 80 per cent of your home’s value. However, you can apply as a co-borrower with your spouse if they are a citizen of either Australia or New Zealand, or are a permanent resident.

Can I get a NAB home loan on casual employment?

While many lenders consider casual employees as high-risk borrowers because of their fluctuating incomes, there are a few specialist lenders, such as NAB, which may provide home loans to individuals employed on a casual basis. A NAB home loan for casual employment is essentially a low doc home loan specifically designed to help casually employed individuals who may be unable to provide standard financial documents. However, since such loans are deemed high risk compared to regular home loans, you could be charged higher rates and receive lower maximum LVRs (Loan to Value Ratio, which is the loan amount you can borrow against the value of the property).

While applying for a home loan as a casual employee, you will likely be asked to demonstrate that you've been working steadily and might need to provide group certificates for the last two years. It is at the lender’s discretion to pick either of the two group certificates and consider that to be your income. If you’ve not had the same job for several years, providing proof of income could be a bit of a challenge for you. In this scenario, some lenders may rely on your year to date (YTD) income, and instead calculate your yearly income from that.

What is a loan-to-value ratio (LVR)?

A loan-to-value ratio (otherwise known as a Loan to Valuation Ratio or LVR), is a calculation lenders make to work out the value of your loan versus the value of your property, expressed as a percentage.   Lenders use this calculation to help assess your suitability for a home loan, and whether you need to pay lender’s mortgage insurance (LMI). As a general rule, most banks will require you to pay LMI if your loan-to-value ratio is 80 per cent or more.   LVR is worked out by dividing the loan amount by the value of the property. If you are looking for a quick ball-park estimate of LVR, the size of your deposit is a good indicator as it is directly proportionate to your LVR. For instance, a loan with an LVR of 80 per cent requires a deposit of 20 per cent, while a 90 per cent LVR requires 10 per cent down payment. 

LOAN AMOUNT / PROPERTY VALUE = LVR%

While this all sounds simple enough, it is worth doing a more accurate calculation of LVR before you commit to buying a place as there are some traps to be aware of. Firstly, the ‘loan amount’ is the price you paid for the property plus additional costs such as stamp duty and legal fees, minus your deposit amount. Secondly, the ‘property value’ is determined by your lender’s valuation of the property, not the price you paid for it, and sometimes these can differ so where possible, try and get your bank to evaluate the property before you put in an offer.

What are the pros and cons of no-deposit home loans?

It’s no longer possible to get a no-deposit home loan in Australia. In some circumstances, you might be able to take out a mortgage with a 5 per cent deposit – but before you do so, it’s important to weigh up the pros and cons.

The big advantage of borrowing 95 per cent (also known as a 95 per cent home loan) is that you get to buy your property sooner. That may be particularly important if you plan to purchase in a rising market, where prices are increasing faster than you can accumulate savings.

But 95 per cent home loans also have disadvantages. First, the 95 per cent home loan market is relatively small, so you’ll have fewer options to choose from. Second, you’ll probably have to pay LMI (lender’s mortgage insurance). Third, you’ll probably be charged a higher interest rate. Fourth, the more you borrow, the more you’ll ultimately have to pay in interest. Fifth, if your property declines in value, your mortgage might end up being worth more than your home.

What is appraised value?

An estimation of a property’s value before beginning the mortgage approval process. An appraiser (or valuer) is an expert who estimates the value of a property. The lender generally selects the appraiser or valuer before sanctioning the loan.

I have a poor credit rating. Am I still able to get a mortgage?

Some lenders still allow you to apply for a home loan if you have impaired credit. However, you may pay a slightly higher interest rate and/or higher fees. This is to help offset the higher risk that you may default on your repayments.

What's wrong with traditional ratings systems?

They’re impersonal 

Most comparison sites give you information about rates, fees and features, but expect you’ll pay more with a low advertised rate and $400 ongoing fee or a slightly higher rate and no ongoing fee. The answer is different for each borrower and depends on a number of variables, in particular how big your loan is. Comparisons are either done based on just today or projected over a full 25 or 30 year loan. That’s not how people borrow these days. While you may take a 30 year loan, most borrowers will either upgrade their house or switch their home loan within the first five years. 

You’re also expected to know exactly which features you want. This is fine for the experienced borrower, but most people know some flexibility is a good thing, but don’t know exactly which features offer more flexibility than others. 

What is the flexibility score?

Today’s home loans often try to lure borrowers with a range of flexible features, including offset accounts, redraw facilities, repayment frequency options, repayment holidays, split loan options and portability. Real Time Ratings™ weights each of these features based on popularity and gives loans a ‘flexibility score’ based on how much they cater to borrowers’ needs over time. The aim is to give a higher score to loans which give borrowers more features and options.

They’re not always timely

In today’s competitive home loan market, lenders are releasing new offers almost daily. These offers are often some of the most attractive deals in the market, but won’t get rated by traditional ratings systems for up to a year. 

The assumptions are out of date 

The comparison rate is based on a loan size of $150,000 and a loan term of 25 years. However, the typical loan size is much higher than that. Million dollar loans are becoming increasingly common, especially if you live in metropolitan parts of Australia, like Sydney and Melbourne. It’s also uncommon for borrowers to hold a loan for 25 years. The typical shelf life for a home loan is a few years. 

The other problem is because it’s a percentage, the difference between 3.9 or 3.7 per cent on a $500,000 doesn’t sound like much, but equals around $683 a year. Real Time Ratings™ not only looks at the difference in the monthly repayments, but it will work out the actual cost difference once fees are taken into consideration. 

What is equity and home equity?

The percentage of a property effectively ‘owned’ by the borrower, equity is calculated by subtracting the amount currently owing on a mortgage from the property’s current value. As you pay back your mortgage’s principal, your home equity increases. Equity can be affected by changes in market value or improvements to your property.

Remaining loan term

The length of time it will take to pay off your current home loan, based on the currently-entered mortgage balance, monthly repayment and interest rate.

Does Australia have no cost refinancing?

No Cost Refinancing is an option available in the US where the lender or broker covers your switching costs, such as appraisal fees and settlement costs. Unfortunately, no cost refinancing isn’t available in Australia.

Can I change jobs while I am applying for a home loan?

Whether you’re a new borrower or you’re refinancing your home loan, many lenders require you to be in a permanent job with the same employer for at least 6 months before applying for a home loan. Different lenders have different requirements. 

If your work situation changes for any reason while you’re applying for a mortgage, this could reduce your chances of successfully completing the process. Contacting the lender as soon as you know your employment situation is changing may allow you to work something out.